add share buttonsSoftshare button powered by web designing, website development company in India

Plumbing Issues From Polybutylene Piping

Plumbing issues from polybutylene pipes are something that many homeowners are visiting. Polybutylene tubing is a sort of plastic resin which has been devised in 1970 as a replacement for conventional aluminum pipes. Polybutylene was used extensively in the making of water distribution piping from 1978 until 1995.

Originally called"The Pipe of the Future," polybutylene is a semi-hard grey-colored plastic pipe that allowed builders to construct houses a little faster and at a lower cost if they used aluminum piping. You can get the services of poly-b pipe renewal whenever required.

Image source google

The problem with polybutylene pipes is chlorine in municipal water supplies reacts with the plastic, which makes it brittle, leading to failures and fractures which can flood the house alongside other plumbing difficulties.

The most trivial of failures is leaking at joints and fittings. On some occasions, the piping itself may fail because the chlorine is stored in the water, and the water is continually running through the pipe. This makes it nearly impossible to identify whether the pipe is in poor condition from simply an external examination.

Polybutylene pipe normally takes ten to fifteen years to start to exhibit signs of severe corrosion. It's tough to provide an honest assessment of the status of poly piping unless there's a visible problem with the outside of the pipe or its setup.

Though some poly piping issues occur from improper installation of these fittings, most complaints result from the integrity of the piping itself.

If you're planning on purchasing a house that was built between 1978 and 1995 have your house inspector thoroughly assess for polybutylene plumbing. Otherwise, you could end up with expensive repairs and have trouble obtaining homeowner's insurance.